Realme 10 Pro RMX3663 Firmware Stock ROM (Flash File)

Realme 10 Pro RMX3663 Flash File used for flash and unlock your device fix pattern lock, FRP and other problems like hang on logo, brick after software update or in any experiment , fix hanging issue and other software related issues. Realme flash tool required login credential to run, if you don’t have then contact me for flash. it’s paid service. Always use latest flash file to flash your device.

Download Realme 10 Pro RMX3663 FLASH FILE

RMX3663domestic_11_A.47_2023042114310126.zip

ALL DRIVER FREE DOWNLOAD

PAID FILE

Reseller India

———————–
Ramzan Gsm
Gsm Online Services
Country : India
WhatsApp, https://wa.me/919036266587
Call +919036266587
Website : https://www.ramzangsm.com/

ALL MOBILE FLASHING UNLOCKING HANG ON LOGO FIX

SERVICE AVAILABLE VIA ULTRA VIEWER / TEAM VIEWER

ABOUT: Realme 10 Pro RMX3663

The Realme 10 Pro (RMX3663) is a mid-range 5G smartphone, launched in November 2022. It features a 120Hz bezel-less display, Snapdragon 695 5G chipset, and a 108MP primary camera, making it a great choice for users looking for a balance between performance, display quality, and camera capability.

📱 Key Specifications of Realme 10 Pro (RMX3663):

✅ Display

• Size: 6.72 inches
• Type: IPS LCD
• Resolution: 1080 x 2400 pixels (Full HD+)
• Refresh Rate: 120Hz
• Brightness: 680 nits (peak)

⚡ Performance

• Chipset: Qualcomm Snapdragon 695 5G (6nm)
• CPU: Octa-core (2×2.2 GHz Cortex-A78 & 6×1.8 GHz Cortex-A55)
• GPU: Adreno 619
• RAM & Storage Options:
  • 6GB + 128GB
  • 8GB + 128GB
  • 8GB + 256GB
• Expandable Storage: Yes, via microSD card

📸 Camera

• Rear Camera:
  • 108MP (f/1.8, PDAF) – Primary
  • 2MP (f/2.4) – Depth Sensor
  • Video: 1080p @ 30fps
• Front Camera:
  • 16MP (f/2.5)
  • Video: 1080p @ 30fps

• Warning:

• Flashing your device will erase all data. Backup your important data before proceeding.Ensure you are using the correct firmware for your device to avoid bricking it.

   

  —

  Requirements:

• 1. MSM Download Tool
  Download the appropriate version for Realme 10 PRO.

2. Firmware File
Obtain the correct official firmware for theRealme 10 Pro RMX3663

.

3. Qualcomm USB Drivers
Install Qualcomm drivers to allow your computer to detect the device in EDL (Emergency Download Mode).

4. USB Cable
Use the original or a high-quality USB cable.

5. Windows PC
The MSM Tool only works on Windows.

—

Steps to FlashRealme 10 Pro RMX3663

:
1. Install Required Drivers

Install the Qualcomm USB drivers on your PC.

Restart your computer after installation.

2. Download Firmware and MSM Tool

Extract the firmware and MSM Download Tool files into a folder.

3. Put Device in EDL Mode

Turn off the device.

Press and hold Volume Up + Volume Down buttons together.

Connect the device to the PC via a USB cable while holding the buttons.

4. Open MSM Download Tool

Launch the MSM Download Tool as an administrator.

Enter the credentials (if required). Usually, “oppo” or “realme” is used as the password.

5. Load the Firmware

In the MSM Download Tool, click on the Load Firmware button.

Navigate to the extracted firmware folder and select the correct .ofp file.

6. Detect Device

Ensure your device is detected in the tool. It should appear as a COM port (e.g., COM3 or COM4).

7. Start Flashing

Click the Start button in the MSM Download Tool.

Wait for the process to complete (this may take 5-10 minutes).

Once completed, you will see a “Download Complete” message.

8. Reboot Device

Disconnect the device and power it on.

—

Troubleshooting Tips:
Device Not Detected:
Check if the Qualcomm drivers are properly installed. Use another USB cable or port if necessary.

MSM Tool Error:
Ensure the tool matches your device model and firmware. Disable antivirus temporarily as it may block the tool.

Boot Loop After Flashing:
Perform a factory reset by booting into recovery mode.